Head Fixed Mounting Circular Disk Bracket for Electric Linear Actuator C & F (Model 0043075) Linear Actuator Sync Controllers and CB-1 / CB-2 /

and CB-1 / CB-2 / CB-4 / CB-6 / CB-8 / CB-12 (1000M) etc

the resistance value between the output lines changes accordingly

If you want to control the device A through the normally open contacts of the device B

Press Button A → Relay activated (device ON)

1 x Magnetic switch controller

Head Fixed Mounting Circular Disk Bracket for Electric Linear Actuator C & F (Model 0043075) Linear Actuator Sync Controllers and CB-1 / CB-2 /Each linear actuator would require two mounting brackets, one to fix the head of linear actuator and another to fix the bottom of linear actuator. This circular disk bracket is used to mount vertically on the head of the linear actuator C linear actuator F . Includes a circular disk bracket and a M12 M16 screw. M12 screws are used for smaller loads, and M16 screws are used for larger loads Iron material. Size: 100 x 10 mm (3. 9 x 0. 4 inches) Diameter