Silicone Hose, 1 3/8 x 1 1/4" 45 deg. Reducing Elbow 20734 Be sure to slide the

Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot

The 5mm wall thickness results in a 3 9/16" (90mm) OD

The 22mm ID at one end and 16mm ID at the other end let you connect a 7/8" OD tube to a 5/8" OD tube

5mm wall thickness (54mm / 2 1/8" and 47mm / 1 7/8" OD) and a working pressure rating over 22 psi (113 psi burst pressure)

they look super-trick

Silicone Hose, 1 3/8 x 1 1/4" 45 deg. Reducing Elbow 20734 Be sure to slide theOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These 45 degree reducer elbow hoses have a 35mm ID at one end