Pay in 4 interest-free payments of $6.15 Learn more
Ships within 48 hours · Estimated delivery Nov 10 - Nov 15
measure the outside diameter of your hose AFTER it is installed on the tubing
The 3-ply reinforcement results in a 4mm wall thickness (30mm / 1 3/16" and 27mm / 1 1/8" OD) and a working pressure rating over 60 psi (300 psi burst pressure)
Note: These ducts are manufactured in 12 foot nominal lengths but only measure 12 feet when stretched tightly
These hump connector hoses have an 80mm ID to provide a flexible coupling between two 3 1/8" OD tubes
5mm wall thickness (54mm / 2 1/8" OD) and a working pressure rating over 21 psi (106 psi burst pressure)
Silicone Hose, 1 1/2" I.D. 135 degree Elbow, 4" Legs 11301 measure the outside diameter ofOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 1 1 2" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from the
US$ 145.00
US$ 45.25
US$ 1440.00
US$ 27.00
US$ 32.00
US$ 12.95
