Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 Four layers of polyester reinforcement

Four layers of polyester reinforcement and 3 reinforcing rings allow operating pressures of 35 psi (142 psi burst pressure) and temperatures up to 350° F (180° C)

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

The 4-ply reinforcement results in a working pressure rating in excess of 20 psi and a 5

The 3-ply reinforcement results in a working pressure rating in excess of 80 psi (340 psi burst pressure) and a 4mm wall thickness (21mm / 13/16" OD)

unreliable quick-disconnect elbow on the bottom of your 2011-16 Ford F-150 coolant reservoir

Silicone Hose, 1/2" I.D. 90 degree Elbow 12438 Four layers of polyester reinforcementOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). This 90 degree elbow has a 1 2" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating in