Gates PowerGrip SB90 Clamp for Hose O.D. 3-1/2 to 3-5/8 SHL127-RED HJ28 and HJ22) and Lined

HJ28 and HJ22) and Lined Hose Clamps (Part No

Use our Hose Joiners (HJ13) and our Lined Hose Clamps (Part No

These anodized aluminum joiner nipples are designed for splicing together our 38mm (1 1/2") ID silicone coolant or turbo intake hose

The 3-ply reinforcement results in a 4mm wall thickness (33mm / 1 1/4" and 24mm / 15/16" OD) and a working pressure rating over 39 psi (199 psi burst pressure)

The 3-ply reinforcement results in a working pressure rating in excess of 65 psi and a 4mm wall thickness (27mm / 1 1/16" OD)

Gates PowerGrip SB90 Clamp for Hose O.D. 3-1/2 to 3-5/8 SHL127-RED HJ28 and HJ22) and LinedRevolutionary Gates PowerGrip SB hose clamps eliminate the need for screwdrivers and even the need for retightening! The special heat shrink polymer sleeves create a tight seal with uniform pressure all around your hose, even if the fitting is out of round. PowerGrip clamps resist loosening throughout repeated heat cycles, making them maintenance free. They eliminate a lot of metal and sharp edges under the hood. On top of all that, they look super