Silicone Hose, 2 3/8" I.D. 180 degree Elbow, 4" Legs Color:Blue This clamp will keep the

This clamp will keep the hose in place

The 4-ply reinforcement results in a 16 psi working pressure and 64 psi burst pressure

Remove the stock clip-retained hose from the reservoir and from the lower hose

These 90 degree reducer elbow hoses have a 51mm ID at one end and a 38mm ID at the other end to connect a 2" OD tube to a 1 1/2" OD tube

It will survive occasional spills and oil leaks

Silicone Hose, 2 3/8" I.D. 180 degree Elbow, 4" Legs Color:Blue This clamp will keep theOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 2 3 8" ID with a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the