017: PL 4-6S BEC 2x5.35V 1x12.0V (Shipment 15th of August 2026) The voltage measurement of the

The voltage measurement of the LiPo packs will be collected from both sensors and passed through the Hub to the FC

1x (040) PL sensor cable / L = 150mm

as well as TDK input and output capacitors to prevent burnout of the UBEC from voltage spikes

1x PDB with soldered-on input wires (2x 20cm 8AWG)

1x CFK enclosure

017: PL 4-6S BEC 2x5.35V 1x12.0V (Shipment 15th of August 2026) The voltage measurement of theUser Manual: DOWNLOAD Input 4 6S LiPo max. 28V. Output 2x 5. 35V 3A + 1x 12. 0V 3A > + 0. 05V > Ripple 10mV (0. 2%) at 1. 5A output current. Inclusive LDO power supply (+5. 00V + 0. 03V) for the sensor board PL xxx as well as PL Sensor Hub X2 and output connector with Molex Clik Mate 4p. Input wrong polarity protection, as well as TDK input and output capacitors to prevent burnout of the UBEC from voltage spikes. Blue power "ON' LED. (3x) 32mm x 50mm